Baumfolder Wetscore Manual de usuario descargar pdf (Pagina 9)

PAGE 9 TP10320A

When running sheets through the folder by hand,if it

becomes necessary to back the sheet out, always lift the

rod to ensure that the sheets do not jam into the needles.

They may cause the needles to bend and you will lose your

If a sheet is under a needle or the sensor when the

folder stops, remove it before restarting the folder. It may

be wet and may cause a jam-up in the rollers.

5.0 WHEN THE FOLDER STOPS RUNNING

A. Remove the sheets from under the sensor and

needles so that the needles do not flow.

B. If the folder will be off longer that 10 minutes:

1. Turn off the control valves to prevent air from

entering the tubing.

2. Unplug the electrical cord(optional).

C. If the folder will be off less that 10 mins.,no need

to shut off the control valves.

NEEDLES WILL CONTINUE TO DRIP DUE TO

PRESSURE IN THE TUBING FOR SEVERAL

SECONDS AFTER THE ON/OFF SOLENOID

CLOSES.

WHEN YOU FINISH A JOB

A. Remove needles and place them in the holes on

the Amplifier housing support base for safety.

B. Unplug the WetScore.

C. Raise the pivot rod and secure it in the upright

position by use of the Velcro strap on the hanger

rod

D. Close all of the control valves.

E. The water bottle may hang full from its hanger

until needed for the next job.

OPERATING TIPS

1.0 WetScore IN COMBINATION WITH A

MECHANICAL SCORE

Due to the variable nature of the many types of stock

operators are forced to deal with these days, there is no rule

as to when to use a combination of mechanical scoring and

WetScore. We have found however, that for certain heavy

sheets, as well as cover stock, that the combination of the

WetScore with a mechanical score in the pull-out rollers of

the folder produces exceptional results. This is especially

true when using the WetScore to apply a score to the last

fold of a 16pg. signature. Many times the use of a mechani-

cal score alone produces cracking or tearing of the signa-

tures along the folded edge of the sheet. The addition of the

water/alcohol line from the WetScore should eliminate this

problem.

2.0 WetScore IN COMBINATION WITH

PERFORATORS.

In many cases when folding 16 pg. or 32 pg. signatures

for the perfect-binder, case binding, or other subsequent

operations, it is desirable for the folded signatures to be as

flat as possible. Bundling devices are commonly used to

flatten the signatures after folding. We have found that the

use of the WetScore, in addition to the perforators used for

folding, produces signatures that are absolutely flat, usually

eliminating the need for bundling. Additionally the

WetScore greatly reduces the common problem of dogearred

corners when used in this way. The WetScore is not meant

to be a replacement for the use of perforations, rather an aide

to their effective use.

3.0 WetScore ACROSS PRINTED

SOLIDS OR ALONG “BLEEDS”

Use caution when applying a WetScore wetted line

across bleeds or printed solids(i.e. reflex blue ink). The

interaction of the alcohol with the ink may cause the ink

vehicle to break down, producing offsetting along the folded

edge. This is especially common when running coated or

varnished stock. If possible, we recommend applying the

WetScore upon the opposite side of the sheet from any

bleeds or solids. Many times this can be accomplished by

changing the configuration of the folder set-up, i.e. by

running the job down in the second plate as opposed to up

in the first plate.

Additionally, applying a solution that contains less

alcohol will usually aide in preventing offsetting of the ink.

However, as the solution decreases in alcohol strength, its

ability to maintain a uniform line on the sheet also decreases.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Comentarios a estos manuales

Sin comentarios

Philips GC4730/02 Datový list (2 strany)

Značka: Philips | Kategorie: Irons | Velikost: 0.95 MB |

Tabulka s obsahem

Ionic Deepsteam

Specifications

Highlights

Další produkty a příručky pro Žehličky Philips

Modely	Typ Dokumentu
GC2560/12	Datový list Philips GC2560 Steam iron, 2 stránky
RI1703/11	Datový list Philips RI1703 steam iron, 2 stránky
GC1730/02	Datový list Philips GC1730 Steam iron, 2 stránky
GC3390/22	Datový list Philips GC3390 Steam iron, 2 stránky
GC1015/31	Datový list Philips GC1015 Steam iron, 2 stránky
GC2652/03	Datový list Philips Steam iron GC2652, 2 stránky
RI1110/12	Datový list Philips Walita Steam iron RI1110/12, 2 stránky
GC1720/02	Datový list Philips 1700 series Steam iron GC1720, 2 stránky
GC3221/02	Datový list Philips Steam iron GC3221, 2 stránky
GC1815/02	Datový list Philips 1700 series Steam iron GC1815, 2 stránky
GC2640/03	Datový list Philips Steam iron GC2640, 2 stránky
GC1830/02	Datový list Philips GC1830 steam iron, 2 stránky
GC6430/02	Datový list Philips 6400 series Pressurised steam generator GC6430, 2 stránky
GC3260	Datový list Philips Steam iron Premium 2300W, 2 stránky
GC1408/02	Datový list Philips GC1408 steam iron, 2 stránky
GC4620	Datový list Philips Iron GC4620/02, 2 stránky
GC4430	Datový list Philips Steam iron, 2 stránky
GC1705	Datový list Philips Steam iron GC1705/01, 2 stránky
RI1703/01	Datový list Philips RI1703 steam iron, 2 stránky
GC4420/01	Datový list Philips Steam iron, 2 stránky

Baumfolder Wetscore Manual de usuario Pagina 9

Comentarios a estos manuales

Philips GC4730/02 manuály

Philips GC4730/02 Datový list (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Žehličky Philips