Baumfolder Wetscore Manual de usuario descargar pdf (Pagina 11)

PAGE 11 TP10320A

MAINTENANCE

WEEKLY

1. Bleed all needle tubing.

2. Using an air compressor, blow out any solids that may

have become trapped in the needles, i.e.-offset powder,

paper particles etc. (remove needles from nozzles first).

MONTHLY

1. Tighten all support bolts on the brackets connecting

the WetScore to the folder rails, some loosening may

occur due to folder vibration. Bolts should be snug

with a wrench, do not overtighten.

2. Check for sharply bent or highly worn needles replace if

necessary.

YEARLY

1. Replace all PVC tubing that seems brittle or abnormally

hard.

A. Use caution when removing the tubing from the

control valve ports as the tubing through use

will become slightly bonded to the brass. It is

recommended that you use an Exacto knife or

sharp blade to cut the tubing away from the

port. Do not attempt to pull the tubing off of

the port, damage to the control valves may

result.

B. Always replace tubing with the appropriate

type.

2. Check for leaks in the control valves. Replace if needed.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Baumfolder Wetscore Manual de usuario Pagina 11